Ventilator Eliciae MV20

Mechanical Ventilator For corona Virus Pademic.

Efficient

The ELICIAE MV20 utilizes a Venturi valve system, which supplies sufficient and optimal tidal volumes on patients with reduced and/or recovering pulmonary function.

Optimal handling

On the ELICIAE MV20 ventilator, function keys and displayed parameters are optimized for easy setup of respiratory parameters and quick start the ventilator, yet still ensures safety and respiratory management for the patient.

Safety

The ELICIAE MV20 ventilator offers a variety of breathing modes, from complete mechanical ventilation in patients with severe pulmonary dysfunction, to mechanical ventilation in patients with gradually recovered pulmonary function. Back up mode is the suitable therapy to rehabilitate patients who have gradually recovered pulmonary function and have spontaneous breathing cycle.

Efficiently reduce cross-infection

The ELICIAE MV20 system combines heat and moisture exchangers with bacterial filters (HME), together with a closed suction system to significantly reduce the chance of cross infection for patients and medical personnel. The patient’s expiratory air flow is able to be treated prior to discharge into an environment outside of the patient room to minimize potential cross infection to other patients and medical personnel.

Ventilator Specifications

Mode

Mandatory Ventilation: time cycled pressure-controlled ventilation. Back-up ventilation: flexible operation in back-up mode where CPAP pressure is applied during spontaneous breathing, and mandatory ventilation is acrtivated when APNEA is detected. Monitor: monitor the pulmonary function of the patient as well as to supply oxygen and PEEP. Standby

Settings & Range

MV baseflow	3 to 20 Lpm
APNEA	1 to 60 sec
Oxygen Saturation	21 to 100%

Inspiration Pressure	0 to 80 cmH2O
Inspiration Time	0.1 to 3.0 sec
PEEP/CPAP	0 to 30 cmH2O
Breath Rate	1 to 250 bpm

Alarms

Monitoring

Monitoring

Tidal Volume: 30mL ~ 2,000mL ±10%+10mL Peak Inspiratory Pressure: 0 ~ 80cmH2O ±10% PEE/CPAP: 0 ~ 20cmH2O ±10% Airway pressure: -10 ~ 80cmH2O ±2cmH2O Apnea timeout: 1 ~ 60 second

Operating Conditions

Operating pressure	0.3～0.5Mpa
Electric shock protection class	Class I
Elictric shock protecion	B type
IP protection class	IPX0
Dimensions	260mm(W)×190mm(H)×283mm(D)
Weight	6kg
Input power	AC100 to 240V (50 to 60Hz)
Ambient temperature range	5 to 40 °C
Ambient humidity range	0 to 95% (without condensation)